PS5 showing no signal? Xbox shutting off mid-match? Switch Joy-Con drifting on its own? We Fix All repairs PlayStation, Xbox and Nintendo consoles at our Brampton shop at 3-2200 Queen St E. Bring it in and we’ll run a free diagnostic, then tell you exactly what’s wrong and what it costs before we touch a screw.
Most common faults, including HDMI ports, overheating and power problems, can be fixed the same day. Every repair is backed by our [90-day, confirm] warranty.
Buttons: Get an Instant Quote · Call (416) 716-1144 · WhatsApp Us
“Select Mobile Problem” ko “What’s wrong with your console?” kar dein. Problem options: No power, No picture or HDMI problem, Overheating or loud fan, Shuts down randomly, Won’t read discs, Stuck on blue light/boot loop/update, Controller drift or buttons, Water or liquid damage, Other. Models mein PS5 Slim, PS5 Pro, Xbox Series X, Series S, Switch OLED, Switch Lite
We repair the consoles Brampton gamers actually use, from current-generation systems to older favourites. If your model isn’t listed, ask us; we can often help.
Common PlayStation jobs include PS5 HDMI port replacement, overheating and fan faults, no-power and power supply problems, disc drive and laser lens issues, and PS4 blue-light boot failures. We also repair DualSense and DualShock controllers for stick drift, charging port faults and unresponsive buttons.
We fix Xbox Series X and Series S consoles that won’t power on, show no picture, shut down randomly or won’t read discs. We also repair Xbox One consoles with overheating, hard drive and power faults. Xbox 360 jobs, including Red Ring of Death faults, are accepted case by case because success depends on the condition of the board.
Joy-Con drift, cracked screens, charging port faults, game card reader problems and a Switch that won’t dock are routine jobs for us.
Older Sega and Nintendo systems, PSP and similar handhelds: bring them in and we’ll assess them honestly. Parts availability can limit what is possible, and the free diagnostic will tell you where you stand.
DualSense, Xbox Wireless and Joy-Con controllers: stick drift, button faults, charging ports and battery problems. Headsets, VR gear and external drives are covered on our accessory repair page.
Most console faults follow a few patterns. Here is what we see most often and what each fix involves.
If your TV says “No Signal”, the picture flickers or sparkles, or the cable feels loose in the port, the HDMI port is a prime suspect. Start by swapping the cable and trying another TV input. If that doesn’t help, the port is likely bent, cracked or lifted off the board. Replacing it means removing the old port from the motherboard and soldering in a new one, which is precision micro-soldering, not a simple swap. On some PS5 consoles a no-picture fault also involves the HDMI retimer chip, which is why a proper diagnostic matters before any quote.
Tip: if Remote Play was set up before the port failed, you may still be able to play on a phone or PC while your console is in for repair.
A console that sounds like a jet engine, feels very hot or shuts off mid-game is usually choking on dust or running on dried-out thermal paste. We open the console, clean the fan and heatsink, replace the thermal compound where needed and check the fan and power circuitry. It is one of the most affordable fixes, and the one most worth doing early, since sustained heat shortens the life of components.
No lights, no sound, no response. The cause could be a failed power supply, a faulty cable, a damaged power input or a motherboard fault. We test each in turn so you only pay to replace what actually failed.
Discs that won’t load, get ejected or make grinding noises usually point to a worn laser lens, a failing drive motor or a mechanical jam. We repair or replace drive components on disc-edition PS5, PS4, Xbox Series X, Xbox One and Xbox 360 consoles.
A PS4 flashing blue, an Xbox stuck on its logo or a PS5 looping into safe mode can be a software, storage or hardware problem. We check the drive and board first. Some cases need a storage replacement or a firmware recovery, and we’ll tell you before we start if the data on the drive is at risk.
Stick drift comes from wear in the analog stick module. On DualSense, Xbox and Joy-Con controllers we replace the worn module, clean contacts and fix charging ports so you don’t have to buy a new controller.
If your console has been splashed or spilled on, unplug it, don’t turn it on, and bring it in as soon as you can. Corrosion spreads over time, so early cleaning gives the best odds. We can’t promise every liquid-damaged console is recoverable, but the diagnostic is free.
The price depends on the console and the fault. A cleaning and thermal paste service sits at the low end, while board-level work such as HDMI port replacement sits higher. Here are our starting prices for the most common repairs:
Repair | Typical turnaround | Price from |
Diagnostic (any console) | Same day | Free |
PS5 HDMI port replacement | [time] | [price] |
PS5 overheating service (clean, thermal paste, fan check) | [time] | [price] |
PS4 HDMI port replacement | [time] | [price] |
Xbox Series X|S HDMI port replacement | [time] | [price] |
Xbox One no-power or power supply repair | [time] | [price] |
Disc drive or laser lens repair | [time] | [price] |
Joy-Con or controller stick drift repair | [time] | [price] |
Switch screen or charging port repair | [time] | [price] |
These are starting prices. We confirm the exact price after the free diagnostic, before any work begins. A single faulty part is usually far cheaper to repair than a replacement console, but where an older console has several faults, we’ll tell you honestly if it isn’t worth fixing.
Repair is usually the better choice when the console has one clear fault (HDMI port, fan, power supply, drive), it is a current-generation model, or it holds saved games and a digital library you don’t want to lose.
Replacement may make more sense when the board has multiple faults, the repair quote approaches what a replacement would cost, or parts for an older model are hard to source.
We’ll give you our honest opinion even if it means you don’t need us. If a console can’t be saved, we can recycle it responsibly. [trade-in/refurbished offer sirf agar abhi available hai]
Our shop is at 3-2200 Queen St E, Brampton, ON L6S 4G9. Gamers visit us from across Brampton, including Bramalea, Springdale, Heart Lake, Castlemore and Mount Pleasant, as well as from Mississauga, Bolton, Caledon, Georgetown, Vaughan and Etobicoke. [Business hours, parking note aur Google Map embed yahan add karein] [Mail-in service hai to 2 sentences add karein]
It depends on the console and the fault. Our diagnostic is free, and starting prices range from for cleaning and thermal paste to for board-level work like HDMI port replacement. We confirm the exact price before any repair begins, so there are no surprises.
Many common repairs, such as HDMI ports, overheating and power faults, are completed the same day. Board-level repairs or jobs waiting on parts can take longer, and we’ll give you a realistic timeline with your quote.
Yes. First try another HDMI cable and TV input. If the picture still won’t appear or the cable feels loose, the HDMI port or its supporting chip may be damaged. We diagnose which it is and replace the port using micro-soldering. Many are done the same day.
Common causes are a failed power supply, a faulty cable, a damaged power input or a board fault. Check the cable and outlet first. If there’s still no response, bring it in for a free diagnostic and we’ll find out which part failed.
Dust-blocked fans and dried thermal paste are the usual culprits. A cleaning and thermal paste service typically solves it. Ignoring it can damage components over time, so it’s worth addressing early.
Yes. Stick drift comes from a worn analog stick module. We replace the module on Joy-Con, DualSense and Xbox controllers, which costs much less than a new controller.
WhatsApp us